Looking for Solar Street Light?    Contact Now

https://solar-led-street-light.com/

After the typhoon “Mangkhut”, what 3 lessons should the solar street lights industry give?

Typhoon No.22, “Mangkhut” passes through Guangdong Province. The whole day was full of whistling wind, storms, trees, and solar street lights on the roadside were all blown down by the strong wind, and the lights were also severely damaged.

Lessons the solar street lights industry learnt

What lessons should the solar street lights industry give after the destructive typhoon “Mangkhut?

First of all, when selecting the solar street lights, not only should we consider their functions but also the windproof and dust-proof of the light poles and lights. Only when this aspect is considered, can we ensure the street lights in city infrastructures can remain properly in the event of natural disaster and guarantee the safety of people.

Light

As an important part of the solar street lights, the quality and opening method are relatively important. Street light poles are normally made of aluminum casting alloy, the thickness must be at standard, cannot have cracks or holes, and should have a well-contacted joint at the joint of every component. Most of the time the lights damaged by the strong wind are caused by the unsuitable design of the light buckles. Therefore, it is necessary to install the spring buckle. Two parts can be installed, and fix the important part of the light body to prevent it from falling off.

Light Pole

The height of the light pole must be selected according to the width and usage of the road. Once again, the wall thickness must not be cut the corner, hot-dipped galvanization should be used for the inside and outside of the light pole, with the thickness of the galvanized layer above 35μm, and the thickness of the flange at 18mm or more. If cold galvanizing is used, the lamp pole will be rusted and easy to break under the strong wind. Thus, strengthen the wall thickness and the thickness of hot-dipped galvanization, otherwise, it cannot be used.

 Solar street lights industry: Foundation

As the most important part of the street light project, the foundation of the street light is critical for the overall windproof and safety.

Firstly, use the C20 concrete for pouring to ensure its stability. Then, confirm the anchor bolt according to the height of the light pole to ensure the stability of its foundation and strengthen its wind resistance capability.

Solar street lights industry technology and innovation

What innovations have changed the solar street lights industry?

Components of Solar Street Lights

Solar street lights consist of several essential components that work together to provide clean and renewable energy for lighting. The primary components of a solar street light include a solar panel, battery, LED light, controller, and pole.

The solar panel captures solar energy and converts it into electricity, which is stored in the battery. The LED light uses this stored energy to provide lighting during the night. The controller manages the charging and discharging of the battery, ensuring optimal performance and longevity. Finally, the pole holds all the components together and provides support for the solar panel and LED light.

the image displays a street light to further explain the innovations in the solar street lights industry

Advances in Solar Street Lights Technology

Over the years, the technology used in solar street lights has improved significantly, making them more efficient, reliable, and cost-effective. One of the most significant advances in solar street lights technology is the use of more efficient LED lights, which consume less energy and last longer than traditional incandescent lights.

Another significant improvement is the development of smart solar street lights, which use advanced sensors and software to adjust lighting levels based on traffic and pedestrian movements. This technology helps to conserve energy while providing adequate lighting when needed.

Furthermore, advancements in battery technology have also made solar street lights more efficient and reliable. Newer batteries are more durable, have a longer lifespan, and can store more energy, ensuring that the lights can operate for longer periods without recharging.

Future of Solar Street Lights

The future of solar street lights industry is bright, with continued advancements in technology expected to drive the growth of the industry. The development of more efficient solar panels, batteries, and LED lights will make solar street lights even more reliable, cost-effective, and energy-efficient.

Moreover, the integration of solar street lights with smart city infrastructure will be a significant driver of innovation in the industry. This integration will enable real-time monitoring, control, and maintenance of the lights, ensuring optimal performance and longevity.

Solar street lights industry- Conclusion

In the aftermath of the devastating typhoon “Mangkhut,” the solar street lights industry has a crucial opportunity to reflect on its role in creating sustainable and resilient communities. By learning three key lessons from this natural disaster, the industry can take meaningful steps to mitigate future risks and ensure that its technology continues to drive positive change around the world. Ultimately, by embracing a forward-thinking and proactive approach, the solar street lights industry has the power to lead the way towards a brighter, more sustainable future for all.

Facebook
Twitter
LinkedIn

GET IN TOUCH

For any inquiries or questions, please don’t hesitate to contact us. We guarantee a response within 24 hours

SOLAR STREET LIGHT MANUFACTURER

For any inquiries or questions, please don’t hesitate to contact us. We guarantee a response within 24 hours.

PROJECT GALLERY

Copyright 2010 – 2024 | DEL ILLUMINATION CO., LTD. | All Rights Reserved |