Since the released of the solar pole light, it has been gaining the popularity and recognition among others. It contributes a lot to the energy saving and environmental protection, respond to national slogan for construction of the new countryside and guarantee the new countryside construction. However, doubts raised over on solar post lights while getting popularity as some respond to the low brightness of the solar pole lights.
Instead of finding the reason internally, what else do we need to do?
DEL ILLUMINATION will answer it for you.
How To Improve the brightness of Solar Pole Light
Reassure the brightness of the solar pole lights before the purchase
Before the purchase of solar street lights, and especially for bulk buying, it is important to select the qualified manufacturers and visit the factory in person to aware the situation. After decide which manufacturer to buy from, you must confirm the configuration needs or ask for a sample from the manufacturer. Some profession manufacturer will also provide some suitable plans according to the buyer’s needs. You can also choose a suitable configuration based on the actual condition and manufacturer’s advice.
Install at the solar pole lights at a lower position
Do not install the solar street lights under the tall plants or buildings if the location need to confirm before the installation of solar street lights. Solar street lights convert the solar power into electricity, and it will not absorb efficiently when the solar panel is blocked by the shadow. If the situation occurs, you can try to adjust the height of the light pole or move to another location so as not to affect the absorption of solar panels.
solar pole lights: Regular inspection
Many buyers do not do the regular inspection on the solar pole lights after installation, and it is not a good idea. Although solar street lights are free of maintenance, it is better regularly inspect to prevent many unnecessary problems. Damage must be fixed once it is seen and solar street lights should be cleaned once in a while to ensure the solar panel operate properly.
Adjust the motion sensors sensitivity on the solar pole light
If the solar pole lights have a motion sensor, adjusting the sensitivity settings can help increase the amount of light they produce when motion is detected.
To adjust the motion sensor sensitivity of your solar pole lights, follow these steps:
- Locate the motion sensor on the pole light. It is usually located on the top of the light fixture or on the side.
- Find the sensitivity adjustment dial or switch on the motion sensor. It is typically a small knob or button located near the sensor.
- Turn the sensitivity dial or switch to the desired level. Increasing the sensitivity will make the light turn on with even slight movements, while decreasing it will require more significant movement to trigger the light.
- Test the sensitivity by walking in front of the light. If the light turns on too frequently or not at all, adjust the sensitivity accordingly until it works properly.
Use higher wattage LED bulbs on your solar pole light
To make your solar pole light brighter, you should install higher wattage LED bulbs. Simply replacing the current LED bulbs with ones that have a higher wattage rating will boost the amount of light they produce. This is a straightforward and effective solution for improving the brightness of your lights.
By increasing the wattage of the LED bulbs, you can ensure that the solar pole lights provide the level of illumination you desire. This will make the area more visible and safer at night, as well as improve the overall aesthetics of the space.
Solar pole light; Conclusion
Above is how to increase the brightness of your solar pole light. Solar pole lights have many advantages, such as energy-saving, being environmentally friendly, manpower saving, smart control, and many more. We must use and install it correctly.
PS: If you have any requirement for solar street light, please feel free to contact us.
