LED Wall lamp installation is relatively simple.
First is to confirm the place for install, then fixed the LED wall lamp holder. Embedded parts or punch is generally used to fixed the wall lamp holder first and fixed the LED wall lamp on the wall.
- Gluing construction
Soak the lower part of glue roller into the glue, keep the upper part exposed and directly or indirectly through the glue roller to touch the work surface. Use the workpiece to drive the glue roller to apply the glue to the bonding surface. The glue roller can be in different grooves and patterns and it can be made of rubber, wood, felt or metal.
- Open assemble and placement
Apply the adhesive on the bonding surface for rapid pervaporation, and left exposed for a while. This resting process of applying the adhesive until the two surfaces assembled is called open assemble. Two bonding surface assembles after gluing, open assemble and store for a while. The process from the bonding to apply manual pressure is called placement.
Adhesive bonds at the same time as curing. During the curing process, ensure that the bonding surface is tightly sealed and must applied pressure before consolidation. If the bonding surface cannot tightly seal in curing process, there will have gap in the bonding layer and influence the bonding quality. In general, requirements for the compacting operation are: the compacting force needs to be at the right size, distributed evenly and sufficient time.
Besides, it cannot deform the adhered body which cause by pressure. Compaction time is related to the adhesive and curing temperature. Compacting force can only be removed when the adhesive to completely cured.
Curing means adhesive is evaporate through the solvent or other chemical reaction that convert from colloidal to solid and causing the bonding of physical chemical process. The quality of curing quality and its qualification have an important relationship. During the operation process, it must satisfy the curing requirement of adhesive in order to guarantee the bonding quality. Curing temperature is a deceive role to the speed of curing and the quality. Even the adhesive curing at room temperature, rising the temperature is beneficial as well.