5 points to look into for solar street light installation. Have you mastered it?

Today, solar street lights have been widely installed in outdoor lighting. Its advantages of energy saving, environmentally friendly and simple installation have make it stand at an important position and are very popular in the market of solar power product. In order to ensure the operation of solar street light installation and avoid malfunctions, it is necessary to pay attention to details during the installation to provide better lighting services for people.

And what are the precautions of solar street light installation?

 

  1. Each component parts are fixed

Installation of the solar street light requires the components of each part be fixed. The solar panel is fixed on the solar panel bracket, the lamp head is fixed to the pick arm, and the bracket and the pick arm are fixed to the main pole, and the connection line is guided to the control box. Next, before lifting the light pole, it must ensure whether the fasteners in each part are firmly fixed, if the lamp is installed correctly and whether the light source is operating properly.

 

  1. Debug system operation

To check whether the debugging system operates properly: loosen the connection line between the controller and the solar panel, the light source should operate properly, and the light of solar panel connection is turned off; at the same time, the carefully observe the changes of indicator lights on the controller, if all the data are normal. It can be hoisted and installed.

 

  1. Be careful when lifting the pole

The screws must be fastened. If the component has an errored angle, it needs to be adjusted and the direction of the sun should completely face south.

 

  1. Battery connects the controller

Place the battery into the battery box and connect the cable to the controller according to the technical requirements. Connect the battery first, then the load, and connect the solar panel at last. Wiring operation should pay attention to the wiring and the terminal marked on the controller. The positive and negative polarities cannot collide and cannot be reversed, otherwise the controller will be damaged.

 

  1. Process the debug system again to confirm it operates properly

Loosen the solar panel connection line on the controller, the solar street light source is lit, connect the solar panel connection line, and the light is off; at the same time, carefully observe the changes of the indicators on the controller, if all the data is normal, the control box can be sealed.

 

Above are the precautions regarding the installation of solar street lights. Today, solar power products are popular and favored on the market, and solar street lights are one of them. Solar street lights are energy saving, environmentally and simple to install, which make it become a new darling of the lighting market.

PS: If you have any requirement for solar LED light, please feel free to contact us.

2019-05-05T02:03:17+00:00